View DF3D-8P-2H20_3909859.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

a254 2mm pitch connector for discrete wire connection(product approved by ul csa standard) df3 series features correspond to board design in wide variation id socket (1) low profile design with the mounting height of 6.8mm (2) achieves the multi-harness by the full automatic id machine in combination with the df11 series id type. (df11 series represents the 2mm pitch single-row product.please refer to page a266 to a277.) crimp socket (1) low profile design with mounting height 7.5mm. (please refer to the application pattern figure on page a256 for details.) (2) provide the contact crimping area with the sufficient space, and secures the stable crimping operation. receptacle (1) the board can be connected horizontally or vertically in combination with the straight header with the right angle header. (2) for horizontal connection, the board to board size is the low profile of 6.6mm. (please refer to the application pattern on page a256 for details.) (3) compatibility with the in-line plug allows the receptacle to set the board side to the receptacle and the cable side to the plug in the board to cable connection. pin header (1) the board pre-fixed kink is treated with the post pin. (2) the style employs a scoop-proof and sturborn box type. (3) the type corresponding to smt is avilable, using the heat-proof resin. this smt header is equipped with the metal tab to prevent peeling in the solder joint area. in-line plug (1) the crimping in-line plug consits of two types, one type, which has pursued after space merits, and the other employs the panel lock type, which can be fixed to the panel. (2) the in-line adapter is available to insert and in-line the id socket from both sides. applications business equipment such as copy machine and printer the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
a255 rating current rating note 1 crimping idc voltage rating ac100v crimping idc wire size wire size press-fit: 250v ac awg 22 to 24:3a awg 26 :2a awg 28 :1a awg 26, 28:1a press-connect: 100v ac operating temperature range operating humidity range storage temperature range storagg humidity range -30 ? to +85 ? note 2. 40% to 80% -10 ? to +60 ? note 3. 40% to 70% ul csa safety standard file no. ul :e52653 csa :lr95109 ul csa acquisition objective item 1 df3- * s-2c 2 df3/3a- * p-2dsa/ds 3 df3/df3aa- * ep-2c 4 df3- * s-2r26/28 5 df3- * p-2h rated current rated voltage ul-csa safety standard and approved specification 30v ac wire size awg 24 to 28: 1a rating item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 30m ohms max 100ma 4. single insertor/extraction force min0.3n (30gf), max4.4n(450gf) measure by the square steel pin with 0.5 0.002mm 5. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 6. humidity (steady state) contact resistance: 30m ohms max.insulation resistance: 500m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 7. temperature cycle contact resistance: 30m ohms max.:insulation resistance: 1000m ohms min. (-55 ? : 30 minutes 5 to 35 ? : 10 minutes 85 ? : 30 minutes 5 to 35 ? : 10minutes) 5 cycles 8. durability (mating/un-mating) contact resistance: 30m ohms max. tin plating: 30 cycles gold plating: 50 cycles 9. resistance to soldering heat no deformation of components affecting performance. flow: 250 ? for 10 seconds manual soldering: 300? for 2 seconds reflow: at the recommended temperature profile manual soldering: 300? for 3 seconds note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. product part materia finish remarks crimping socket insulator polyamide black ul94v-0 idc contact for socket contact phosphor bronze tin plated or gold plated id socket insulator polyamide black ul94v-0 contact phosphor bronze tin plated or gold plated receptacle insulator polyamide black ul94v-0 contact phosphor bronze tin plated or gold plated pin header insulator polyamide black ul94v-0 contact brass tin plated or gold plated insulator polyamide beige ul94v-0 smt pin header contact phosphor bronze tin plated or gold plated metal tab brass tin plated in-line plug insulator polyamide black ul94v-0 in-line idc contact contact phosphor bronze tin plated or gold plated in-line adapter insulator polyamide black ul94v-0 contact brass tin plated note:hrs's tin plating takes actions against whisker. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
a256 df 3 - * s - 2c qr e wt y q series name : df w series no. : 3, 3a, 3aa e number of contacts : 2~15 r connector type s : socket p : pin header ep : in-line plug t contact pitch : 2mm y connection form/contact style c : crimp socket r26 : id socket for awg26 r28 : id socket for awg28 dsa : straight through hole ds : right angle through hole v : straight smt h : right angle smt a : adapter ordering information connector df3 - ep2428pcfa qr e w q contact type none : for socket ep : for in-line plug w applicable wire size 22 : awg22 2428 : awg24 to 28 e contact type/packaging type scf : socket contact, embossed tape sc : socket contact, bag pcf : plug contact, embossed tape pc : plug contact, bag r plating type blank : tin plated a : gold plated c : gold plated contact application pattern the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
a257 note 1. mark to determine the socket name mark6: r26, mark8: r28 this picture shows the cable assembled status. id socket [specific no.] * * , ( * * ) blank : tin plated, 100 pieces per bag (01) : gold plated, 100 pieces per bag (20) : tin plated, tube packaging part number cl no. number of ab tube packaging contacts quantity df3- 2s-2r26( ** ) 543-0078-7- ** 262 190 pieces df3- 3s-2r26( ** ) 543-0079-0- ** 3 8 4 142 df3- 4s-2r26( ** ) 543-0080-9- ** 4 10 6 114 df3- 5s-2r26( ** ) 543-0081-1- ** 5128 0 94 df3- 6s-2r26( ** ) 543-0082-4- ** 61410 0 80 df3- 7s-2r26( ** ) 543-0083-7- ** 71612 0 70 df3- 8s-2r26( ** ) 543-0084-0- ** 81814 0 62 df3- 9s-2r26( ** ) 543-0085-2- ** 92016 0 56 df3-10s-2r26( ** ) 543-0086-5- ** 10 22 18 0 52 df3-11s-2r26( ** ) 543-0087-8- ** 11 24 20 0 46 df3-12s-2r26( ** ) 543-0088-0- ** 12 26 22 0 44 df3-13s-2r26( ** ) 543-0089-3- ** 13 28 24 0 40 df3-14s-2r26( ** ) 543-0090-2- ** 14 30 26 0 38 df3-15s-2r26( ** ) 543-0091-5- ** 15 32 28 0 34 part number cl no. number of ab tube packaging contacts quantity df3- 2s-2r28 ( ** ) 543-0092-8- ** 262190 pieces df3- 3s-2r28 ( ** ) 543-0093-0- ** 384142 df3- 4s-2r28( ** ) 543-0094-3- ** 4 10 6 114 df3- 5s-2r28( ** ) 543-0095-6- ** 5128 0 94 df3- 6s-2r28( ** ) 543-0096-9- ** 61410 0 80 df3- 7s-2r28( ** ) 543-0097-1- ** 71612 0 70 df3- 8s-2r28( ** ) 543-0098-4- ** 81814 0 62 df3- 9s-2r28( ** ) 543-0099-7- ** 92016 0 56 df3-10s-2r28( ** ) 543-0100-4- ** 10 22 18 0 52 df3-11s-2r28( ** ) 543-0101-7- ** 11 24 20 0 46 df3-12s-2r28( ** ) 543-0102-0- ** 12 26 22 0 44 df3-13s-2r28( ** ) 543-0103-2- ** 13 28 24 0 40 df3-14s-2r28( ** ) 543-0104-5- ** 14 30 26 0 38 df3-15s-2r28( ** ) 543-0105-8- ** 15 32 28 0 34 unit: mmunit: mm awg26 awg28 unit: mm note 2.the quantity for delivery of the specific no. "none" and (01) is determined per bag (100pcs.). if needed, please order t he productsper bag. note 3.if the full automatic idc machine to hit the df11 single core,the (20) tube packaging specification will be applied. note 4.order the tube packaging product, multiplying the tube packaging quantity (pieces). applicable cable part number applicable cable jacket diameter df3- * s-2r26 ul1061 awg26 (7/0.16) ? 0.9 to 1mm df3- * s-2r28 ul1061 awg28 ( 7/0.127 ) ? 0.9 to 1mm applicable id connection tool type part number connection type remarks effective harness form 1 df11-both ended, single ended df11 single contact punching 2 df11-df11, separation connector is the full automatic id machine am700/df11 3 df11-df3, separation specification (20). effective harness length tube packaging applied 100 to 2,000mm conduction inspection mechanism installed df3 df4 desktop id machine df3(4)/id-mo df3 no restriction desktop machine for small lot df4 no restriction the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
a258 this picture shows the contact crimped status. crimping socket note1: the product's contact number indicated. note2: the quantity for delivery of the specification no. "none" is determined per bag (100 pcs.). if needed, please order the products per bag. note3: a quantity of "500 pieces package" and "1000 pieces package" for delivery is dealt with pieces. order example: 500, 1000, and 1 500 pieces... unit: mm part number cl no. df3-2s-2c( ** ) df3-3s-2c( ** ) df3-4s-2c( ** ) df3-5s-2c( ** ) df3-6s-2c( ** ) df3-7s-2c( ** ) df3-8s-2c( ** ) 543-0003-8- ** 543-0004-0- ** 543-0005-3- ** 543-0006-6- ** 543-0007-9- ** 543-0008-1- ** 543-0009-4- ** 2 3 4 5 6 7 8 0 6 0 8 10 12 14 16 18 0 2 0 4 0 6 0 8 10 12 14 number of contacts a b part number cl no. df3- 1 9s-2c( ** ) df3-10s-2c( ** ) df3-11s-2c( ** ) df3-12s-2c( ** ) df3-13s-2c( ** ) df3-14s-2c( ** ) df3-15s-2c( ** ) 543-0010-3- ** 543-0011-6- ** 543-0012-9- ** 543-0013-1- ** 543-0014-4- ** 543-0015-7- ** 543-0016-0- ** 0 9 10 11 12 13 14 15 20 22 24 26 28 30 32 16 18 20 22 24 26 28 number of contacts a b board through-hole diameter: ? 0.7 + 0 + 0.1 receptacle note2: please order the tube packaging at the multiplied tube packaging quantity (pieces). unit: mm note1: the product's contact number indicated part number cl no. df3-2s-2dsa( ** ) df3-3s-2dsa( ** ) df3-4s-2dsa( ** ) df3-5s-2dsa( ** ) df3-6s-2dsa( ** ) df3-7s-2dsa( ** ) df3-8s-2dsa( ** ) 543-0048-6- ** 543-0049-9- ** 543-0050-8- ** 543-0051-0- ** 543-0052-3- ** 543-0053-6- ** 543-0054-9- ** 2 3 4 5 6 7 8 0 6 0 8 10 12 14 16 18 0 2 0 4 0 6 0 8 10 12 14 number of contacts a b 80 pieces 60 48 40 34 30 27 tube package quantity part number cl no. df3- 9s-2dsa( ** ) df3-10s-2dsa( ** ) df3-11s-2dsa( ** ) df3-12s-2dsa( ** ) df3-13s-2dsa( ** ) df3-14s-2dsa( ** ) df3-15s-2dsa( ** ) 543-0055-1- ** 543-0056-4- ** 543-0057-7- ** 543-0058-0- ** 543-0059-2- ** 543-0060-1- ** 543-0061-4- ** 0 9 10 11 12 13 14 15 20 22 24 26 28 30 32 16 18 20 22 24 26 28 number of contacts a b 24 pieces 21 20 18 17 16 15 tube package quantity [specific no.] * * , ( * * ) (20) :tin plated, tube packaging (50) : gold plated, tube packaging [specific no.] * * , ( * * ) blank: 100 pieces per pack the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
a259 board through-hole diameter: ? 0.8 + 0 + 0.1 kink pre-fixed effective diameter : ? 0.8 + 0 + 0.05 straight pin header board through-hole diameter: ? 0.8 + 0 + 0.1 kink pre-fixed effective diameter : ? 0.8 + 0 + 0.05 right angle pin header note : the quantity for delivery is determined per bag(100 pcs.). if needed, please order the products per bag. note : the quantity for delivery is determined per bag (100 pcs.). if needed, please order the products per bag. unit: mm part number tin plating gold plating cl no. df3a- 2p-2dsa df3a- 3p-2dsa df3a- 4p-2dsa df3a- 5p-2dsa df3a- 6p-2dsa df3a- 7p-2dsa df3a- 8p-2dsa df3a- 9p-2dsa df3a-10p-2dsa df3a-11p-2dsa df3a-12p-2dsa df3a-13p-2dsa df3a-14p-2dsa df3a-15p-2dsa 543-0165-0 543-0166-2 543-0167-5 543-0168-8 543-0169-0 543-0170-0 543-0171-2 543-0172-5 543-0173-8 543-0174-0 543-0175-3 543-0176-6 543-0177-9 543-0178-1 0 6 0 8 10 12 14 16 18 20 22 24 26 28 30 32 0 2 0 4 0 6 0 8 10 12 14 16 18 20 22 24 26 28 a b 2 3 4 5 6 7 8 9 10 11 12 13 14 15 number of contacts part number cl no. df3- 2p-2dsa( 01 ) df3- 3p-2dsa( 01 ) df3- 4p-2dsa( 01 ) df3- 5p-2dsa( 01 ) df3- 6p-2dsa( 01 ) df3- 7p-2dsa( 01 ) df3- 8p-2dsa( 01 ) df3- 9p-2dsa( 01 ) df3-10p-2dsa( 01 ) df3-11p-2dsa( 01 ) df3-12p-2dsa( 01 ) df3-13p-2dsa( 01 ) df3-14p-2dsa( 01 ) df3-15p-2dsa( 01 ) 543-0017-2-01 543-0018-5-01 543-0019-8-01 543-0020-7-01 543-0021-0-01 543-0022-2-01 543-0023-5-01 543-0024-8-01 543-0025-0-01 543-0026-3-01 543-0027-6-01 543-0028-9-01 543-0029-1-01 543-0030-0-01 unit: mm part number tin plating gold plating cl no. df3a- 2p-2ds df3a- 3p-2ds df3a- 4p-2ds df3a- 5p-2ds df3a- 6p-2ds df3a- 7p-2ds df3a- 8p-2ds df3a- 9p-2ds df3a-10p-2ds df3a-11p-2ds df3a-12p-2ds df3a-13p-2ds df3a-14p-2ds df3a-15p-2ds 543-0179-4 543-0180-3 543-0181-6 543-0182-9 543-0183-1 543-0184-4 543-0185-7 543-0186-0 543-0187-2 543-0188-5 543-0189-8 543-0190-7 543-0191-0 543-0192-2 0 6 0 8 10 12 14 16 18 20 22 24 26 28 30 32 0 2 0 4 0 6 0 8 10 12 14 16 18 20 22 24 26 28 a b 2 3 4 5 6 7 8 9 10 11 12 13 14 15 number of contacts part number cl no. df3- 2p-2ds( 01 ) df3 -3p-2ds( 01 ) df3- 4p-2ds( 01 ) df3- 5p-2ds( 01 ) df3- 6p-2ds( 01 ) df3- 7p-2ds( 01 ) df3- 8p-2ds( 01 ) df3- 9p-2ds( 01 ) df3-10p-2ds( 01 ) df3-11p-2ds( 01 ) df3-12p-2ds( 01 ) df3-13p-2ds( 01 ) df3-14p-2ds( 01 ) df3-15p-2ds( 01 ) 543-0031-3-01 543-0032-6-01 543-0033-9-01 543-0034-1-01 543-0035-4-01 543-0036-7-01 543-0037-0-01 543-0038-2-01 543-0039-5-01 543-0040-4-01 543-0041-7-01 543-0042-0-01 543-0043-2-01 543-0044-5-01 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
a260 b pcb mounting pattern note : please order the tube packaging product, multiplying by tube package quantity ( pcs.). straight pin header (smt) [specific no.] * * , ( * * ) (20) :tin plated tube packaging (50) : gold plated tube packaging note : if a pattern is included in the shaded area and is not treated with resist, it could touch the connector contact. unit: mm part number with boss cl no. df3- 2p-2v( ** ) df3- 3p-2v( ** ) df3- 4p-2v( ** ) df3- 5p-2v( ** ) df3- 6p-2v( ** ) df3- 7p-2v( ** ) df3- 8p-2v( ** ) df3- 9p-2v( ** ) df3-10p-2v( ** ) df3-11p-2v( ** ) df3-12p-2v( ** ) df3-13p-2v( ** ) df3-14p-2v( ** ) df3-15p-2v( ** ) 543-0121-4- ** 543-0122-7- ** 543-0123-0- ** 543-0124-2- ** 543-0125-5- ** 543-0126-8- ** 543-0127-0- ** 543-0128-3- ** 543-0129-6- ** 543-0130-5- ** 543-0131-8- ** 543-0132-0- ** 543-0133-3- ** 543-0134-6- ** 0 2 0 4 0 6 0 8 10 12 14 16 18 20 22 24 26 28 8.5 10.5 12.5 14.5 16.5 18.5 20.5 22.5 24.5 26.5 28.5 30.5 32.5 34.5 a b 2 3 4 5 6 7 8 9 10 11 12 13 14 15 number of contacts part number without boss cl no. df3d- 2p-2v( ** ) df3d- 3p-2v( ** ) df3d- 4p-2v( ** ) df3d- 5p-2v( ** ) df3d- 6p-2v( ** ) df3d- 7p-2v( ** ) df3d- 8p-2v( ** ) df3d- 9p-2v( ** ) df3d-10p-2v( ** ) df3d-11p-2v( ** ) df3d-12p-2v( ** ) df3d-13p-2v( ** ) df3d-14p-2v( ** ) df3d-15p-2v( ** ) 543-0207-8- ** 543-0208-0- ** 543-0209-3- ** 543-0210-2- ** 543-0211-5- ** 543-0212-8- ** 543-0213-0- ** 543-0214-3- ** 543-0215-6- ** 543-0216-9- ** 543-0217-1- ** 543-0218-4- ** 543-0219-7- ** 543-0220-6- ** 4.8 6.8 8.8 10.8 12.8 14.8 16.8 18.8 20.8 22.8 24.8 26.8 28.8 30.8 c 8.74 10.74 12.74 14.74 16.74 18.74 20.74 22.74 24.74 26.74 28.74 30.74 32.74 34.74 d 41 pcs. 34 30 26 23 21 19 18 17 15 14 14 13 12 tube packaging quantity the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
( 21 )tin plated ( 51 )gold plated ( 21 )tin plated ( 51 )gold plated a261 b pcb mounting pattern b tube size note1: please order the tube packaging product, multipliing the tube package quantity. ( pcs.) note2: please order the emboss packaging product by the reel number. (1 reel : 1000 pcs.) right angle pin header (smt) [specific no.] * * , ( * * ) (20) :tin plated tube packaging (21) : tin plated embossed packaging (note the number of contacts for marchandization.) (50) :gold plated tube packaging (51) : gold plated embossded packaging unit: mm part number with boss cl no. df3- 2p-2h( ** ) df3- 3p-2h( ** ) df3- 4p-2h( ** ) df3- 5p-2h( ** ) df3- 6p-2h( ** ) df3- 7p-2h( ** ) df3- 8p-2h( ** ) df3- 9p-2h( ** ) df3-10p-2h( ** ) df3-11p-2h( ** ) df3-12p-2h( ** ) df3-13p-2h( ** ) df3-14p-2h( ** ) df3-15p-2h( ** ) 543-0107-3- ** 543-0108-6- ** 543-0109-9- ** 543-0110-8- ** 543-0111-0- ** 543-0112-3- ** 543-0113-6- ** 543-0114-9- ** 543-0115-1- ** 543-0116-4- ** 543-0117-7- ** 543-0118-0- ** 543-0119-2- ** 543-0120-1- ** 2 4 6 8 10 12 14 16 18 20 22 24 26 28 8.5 10.5 12.5 14.5 16.5 18.5 20.5 22.5 24.5 26.5 28.5 30.5 32.5 34.5 a b 2 3 4 5 6 7 8 9 10 11 12 13 14 15 number of contacts part number without boss cl no. df3d- 2p-2h( ** ) df3d- 3p-2h( ** ) df3d- 4p-2h( ** ) df3d- 5p-2h( ** ) df3d- 6p-2h( ** ) df3d- 7p-2h( ** ) df3d- 8p-2h( ** ) df3d- 9p-2h( ** ) df3d-10p-2h( ** ) df3d-11p-2h( ** ) df3d-12p-2h( ** ) df3d-13p-2h( ** ) df3d-14p-2h( ** ) df3d-15p-2h( ** ) 543-0221-9- ** 543-0222-1- ** 543-0223-4- ** 543-0224-7- ** 543-0225-0- ** 543-0226-2- ** 543-0227-5- ** 543-0228-8- ** 543-0229-0- ** 543-0230-0- ** 543-0231-2- ** 543-0232-5- ** 543-0233-8- ** 543-0234-0- ** 4.8 6.8 8.8 10.8 12.8 14.8 16.8 18.8 20.8 22.8 24.8 26.8 28.8 30.8 c 8.74 10.74 12.74 14.74 16.74 18.74 20.74 22.74 24.74 26.74 28.74 30.74 32.74 34.74 d 41 pcs. 34 30 26 23 21 19 18 17 15 14 14 13 12 tube packaging quantity number of contacts for embossed packaging available df3 d - * p-2h df3d- * p-2h kkkkk k kkk k kkk k kk k kkkkkkk kkkk k kkkkkk kkk 2 3 4 5 6 7 8 9 101112131415 numbers of contacts the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
a262 photo: contact inserted status in-line plug note : the specific no."none" item is delivered per bag (100 pcs.). please order products per bag unit. note : specific no."none" item is delivered per bag (100 pcs.). please order products per bag unit. unit: mm part number cl no. df3- 9ep-2c( ** ) df3-10ep-2c( ** ) df3-11ep-2c( ** ) df3-12ep-2c( ** ) df3-13ep-2c( ** ) df3-14ep-2c( ** ) df3-15ep-2c( ** ) 543-0071-8- ** 543-0072-0- ** 543-0073-3- ** 543-0074-6- ** 543-0075-9- ** 543-0076-1- ** 543-0077-4- ** 0 9 10 11 12 13 14 15 20 22 24 26 28 30 32 16 18 20 22 24 26 28 number of contacts a b unit: mm part number cl no. df3aa- 2ep-2c( ** ) df3aa- 3ep-2c( ** ) df3aa- 4ep-2c( ** ) df3aa- 5ep-2c( ** ) df3aa- 6ep-2c( ** ) df3aa- 7ep-2c( ** ) df3aa- 8ep-2c( ** ) df3aa- 9ep-2c( ** ) df3aa-10ep-2c( ** ) df3aa-11ep-2c( ** ) df3aa-12ep-2c( ** ) df3aa-13ep-2c( ** ) df3aa-14ep-2c( ** ) df3aa-15ep-2c( ** ) 543-0151-5- ** 543-0152-8- ** 543-0153-0- ** 543-0154-3- ** 543-0155-6- ** 543-0156-9- ** 543-0157-1- ** 543-0158-4- ** 543-0159-7- ** 543-0160-6- ** 543-0161-9- ** 543-0162-1- ** 543-0163-4- ** 543-0164-7- ** 2 3 4 5 6 7 8 9 10 11 12 13 14 15 11 13 15 17 19 21 23 25 27 29 31 33 35 37 0 6 0 8 10 12 14 16 18 20 22 24 26 28 30 32 number of contacts a b 0 2 0 4 0 6 0 8 10 12 14 16 18 20 22 24 26 28 c 9.4 11.4 13.4 15.4 17.4 19.4 21.4 23.4 25.4 27.4 29.4 31.4 33.4 35.4 d 6.3 8.3 10.3 12.3 14.3 16.3 18.3 20.3 22.3 24.3 26.3 28.3 30.3 32.3 e photo: contact insertion status in-line plug with panel lock b panel cutouts [specific no.] * * , ( * * ) blank : 100 pcs. per bag part number cl no. df3- 2ep-2c( ** ) df3- 3ep-2c( ** ) df3- 4ep-2c( ** ) df3- 5ep-2c( ** ) df3- 6ep-2c( ** ) df3- 7ep-2c( ** ) df3- 8ep-2c( ** ) 543-0064-2- ** 543-0065-5- ** 543-0066-8- ** 543-0067-0- ** 543-0068-3- ** 543-0069-6- ** 543-0070-5- ** 2 3 4 5 6 7 8 0 6 0 8 10 12 14 16 18 0 2 0 4 0 6 0 8 10 12 14 number of contacts a b note1: applicable panel thickness is 1.6 to 1.0mm. (however, a slight backlash is considered for the thickness other than 1.6 and 1.2mm.) note2: use the non-radius surface at the hooking panel edge. note3: contact no. indicates 1, 4, 8, 12, and 15. [specific no.] * * , ( * * ) blank: 1 pack the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
a263 note : specific no."none" item is delivered per bag (100 pcs.). please order products per bag unit. unit: mm part number cl no. df3- 2ep-2a( ** ) df3- 3ep-2a( ** ) df3- 4ep-2a( ** ) df3- 5ep-2a( ** ) df3- 6ep-2a( ** ) df3- 7ep-2a( ** ) df3- 8ep-2a( ** ) df3- 9ep-2a( ** ) df3-10ep-2a( ** ) df3-11ep-2a( ** ) df3-12ep-2a( ** ) df3-13ep-2a( ** ) df3-14ep-2a( ** ) df3-15ep-2a( ** ) 543-0267-0- ** 543-0268-2- ** 543-0269-5- ** 543-0270-4- ** 543-0271-7- ** 543-0272-0- ** 543-0273-2- ** 543-0274-5- ** 543-0275-8- ** 543-0276-0- ** 543-0277-3- ** 543-0278-6- ** 543-0279-9- ** 543-0280-8- ** 2 3 4 5 6 7 8 9 10 11 12 13 14 15 11 13 15 17 19 21 23 25 27 29 31 33 35 37 0 6 0 8 10 12 14 16 18 20 22 24 26 28 30 32 number of contacts a b 0 2 0 4 0 6 0 8 10 12 14 16 18 20 22 24 26 28 c 9.4 11.4 13.4 15.4 17.4 19.4 21.4 23.4 25.4 27.4 29.4 31.4 33.4 35.4 d 6.3 8.3 10.3 12.3 14.3 16.3 18.3 20.3 22.3 24.3 26.3 28.3 30.3 32.3 e adapter to in-line by pushing 2 pcs. of socket from both sides no.1-no.1 connection circuit type in-line adapter with panel lock b panel cutouts [specific no.] * * , ( * * ) blank : 100 pcs. per bag note1: applicable panel thickness is 1.6 to 1.0mm.(however,backlash will occur except for 1.6, 1.2mm thickness.) note2: please use the non-radius surface at the hooking panel edge. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
a264 crimping contact for socket applicable wire (tin plating annealed copper wire) crimping contact for in-line plug note1: if other wires are used instead of the applicable cable, please contact hrs company. note2: df3-22scf is applicable to ul1061. note1: if other wires are used instead of the applicable cable, please contact hrs company. recommended wire ul1061, ul1007 (note 2.) strip length 1.8 to 2.3mm note : if any trouble has occurred due to tools other than designated tool, hirose bears no respoisibility for any trouble. b applicable crimping tool part number cl no. df3-22scf df3-22sc df3-2428scf df3-2428sc df3-2428scfc df3-2428scc 543-0235-3 543-0236-6 543-0001-2 543-0002-5 543-0046-0 543-0047-3 reel contact bulk contact reel contact bulk contact reel contact bulk contact 10000 pcs. per reel 100 pcs. per pack 10000 pcs. per reel 100 pcs. per pack 10000 pcs. per reel 100 pcs. per pack type quantity tin plated gold plated finish part number cl no. df3-ep2428pcf df3-ep2428pc df3-ep2428pcfa df3-ep2428pca 543-0062-7 543-0063-0 543-0149-3 543-0150-2 reel contact bulk contact reel contact bulk contact 10000 pcs. per reel 100 pcs. per pack 10000 pcs. per reel 100 pcs. per pack type quantity tin plated gold plated finish applicable wire (tin plating annealed copper wire) recommended wire ul1061, ul1007 strip length 1.9 to 2.5mm awg 22 ( 17pcs./0.16mm ) awg 24 ( 11pcs./0.16mm ) awg 26 ( 7pcs./0.16mm ) awg 28 ( 7pcs./0.127mm ) ? 1.2 to ? 1.45mm ? 0.75 to ? 1.45mm jacket diameter conductor size (wire configuration) awg 24 ( 11pcs./0.16mm ) awg 26 ( 7pcs./0.16mm ) awg 28 ( 7pcs./0.127mm ) ? 0.75 to ? 1.45mm jacket diameter conductor size (wire configuration) part number type cl no. ap105-df3-2428s ap105-df3-22s ap105-df3-ep2428p cm-105 df3-ta2428hc df3ep-ta2428hc df3-ta22hc df-c-po (a) applicator press unit hand crimping tool extraction tool 901-4503-3 901-4549-4 901-4508-7 901-0005-4 550-0164-5 550-0184-2 550-0257-4 550-0170-8 df3-2428scf/scfc df3-22scf df3-ep2428pcf/pcfa df3-2428sc/scc df3-ep2428pc/pca df3-22sc df3- **** scf df3-ep **** pcf applicable contact the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
a265 1. recommended temperature profile ( smt ) 2. recommended manual soldering condition ( smt ) 3. recommended screen thickness ( smt ) 4. board warpage ( smt ) 5. recommended soldering condition ( dip ) 6. cleaning condition 7. connection condition note1: maximum twice action is allowed under the same condition. however, the interval between the first and second actions must be maintained at room temperature. note2: the temperature indicates the board surface temperature on the connector lead area. soldering iron temperature: 290 10 ? , soldering time: within 2 seconds 0.15 to 0.2mm based on both connector edges, 0.03mm max. in the connector center portion flow condition with automatic soldering tool. soldering temperature: 250 5 ? , soldering time: within 3 seconds manual soldering condition. soldering iron temperature: 290 10 ? , soldering time: within 2 seconds refer to the "nylon connector use hand book". refer to the "nylon connector use hand book". b b unit: mm product type size number of contacts a b c d df3/3d- * p-2h 2 to 4 5 to 7 8 to 12 13 to 15 24 32 44 56 28.4 40.4 52.4 11.5 14.2 20.2 26.2 24.4 32.4 44.4 56.4 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
part number(s) obtained from the individual pages of the pdf catalogs on this site may have been changed.please verify current part number on the rohs link. go go 1.all information, such as connector spec ifications, dimensions, etc, on the web site are reference only. connector information can be changed without notice. please request the latest specification and dwg from hrs be fore you design in our products. please confirm the rohs status using the rohs compliant part number search on this web site. 2.please check the availability of non-ro hs compliant products before ordering. non-rohs compliant products may be discontinued . fx8 series product list hel p 213kb data: 80 request series description hrs no product no no. of positions connector type contact gender contact spacing (mm) terminal pitch (mm) stack height (mm) pcb mount type current rating (amps) (max.) contact mating area plating operating temperature range (degrees c) selling unit general description go fx8 578-0145-6 71 fx8-100/100p11-sv1j(71) 200 board mounting male 0.6 0.6 4.00 smt 0.4 gold -55 to 85 1pcs. header; straight; 2-piece connection; locating boss; height:+1mm; changed finish go fx8 578-0105-1 71 fx8-100/100p11-svj(71) 200 board mounting male 0.6 0.6 3.00 smt 0.4 gold -55 to 85 1pcs. header; straight; 2-piece connection; locating boss; changed finish go fx8 578-0005-7 71 fx8-100p-sv(71) 100 board mounting male 0.6 0.6 3.00 smt 0.4 gold -55 to 85 1pcs. header; straight; locating boss; changed finish go fx8 578-0005-7 91 fx8-100p-sv(91) 100 board mounting male 0.6 0.6 3.00 smt 0.4 gold -55 to 85 14pcs. (1stick) header; straight; locating boss; specified packaging; changed finish go fx8 578-0005-7 92 fx8-100p-sv(92) 100 board mounting male 0.6 0.6 3.00 smt 0.4 gold -55 to 85 1reel (1000pcs.) header; straight; locating boss; specified packaging; changed finish go fx8 578-0005-7 93 fx8-100p-sv(93) 100 board male 0.6 0.6 3.00 smt 0.4 gold -55 to 85 1reel header; straight; locating boss; suction tape for automatic pcb pa g e 1 of 9 product lis t 11-ma r -2008 mhtml:file://\\blrwnapp002\sourcing\automation\automation_cpr\03112008\hiro\hiro.mh t
mounting (1000pcs.) mounting; specified packaging; changed finish go fx8 578-0045-1 71 fx8-100p-sv1(71) 100 board mounting male 0.6 0.6 4.00 smt 0.4 gold -55 to 85 1pcs. header; straight; locating boss; height:+1mm; changed finish go fx8 578-0045-1 91 fx8-100p-sv1(91) 100 board mounting male 0.6 0.6 4.00 smt 0.4 gold -55 to 85 14pcs. (1stick) header; straight; locating boss; height:+1mm; specified packaging; changed finish go fx8 578-0045-1 92 fx8-100p-sv1(92) 100 board mounting male 0.6 0.6 4.00 smt 0.4 gold -55 to 85 1reel (1000pcs.) header; straight; locating boss; height:+1mm; specified packaging; changed finish go fx8 578-0045-1 93 fx8-100p-sv1(93) 100 0.6 0.6 4.00 0.4 gold -55 to 85 1reel (1000pcs.) go fx8 578-0205-6 00 fx8-100s-sv 100 board mounting female 0.6 0.6 3.00,4.00 smt 0.4 gold -55 to 85 1pcs. socket; straight; locating boss go fx8 578-0205-6 21 fx8-100s-sv(21) 100 board mounting female 0.6 0.6 3.00,4.00 smt 0.4 gold -55 to 85 14pcs. (1magazine) socket; straight; locating boss; specified packaging go fx8 578-0205-6 22 fx8-100s-sv(22) 100 board mounting female 0.6 0.6 3.00,4.00 smt 0.4 gold -55 to 85 1reel (1000pcs.) socket; straight; locating boss; specified packaging go fx8 578-0205-6 23 fx8-100s-sv(23) 100 board mounting female 0.6 0.6 3.00,4.00 smt 0.4 gold -55 to 85 1reel (1000pcs.) socket; straight; locating boss; suction tape for automatic pcb mounting; specified packaging go fx8 578-0146-9 71 fx8-120/120p11-sv1j(71) 240 board mounting male 0.6 0.6 4.00 smt 0.4 gold -55 to 85 1pcs. header; straight; 2-piece connection; locating boss; height:+1mm; changed finish go fx8 578-0106-4 71 fx8-120/120p11-svj(71) 240 board mounting male 0.6 0.6 3.00 smt 0.4 gold -55 to 85 1pcs. header; straight; 2-piece connection; pa g e 2 of 9 product lis t 11-ma r -2008 mhtml:file://\\blrwnapp002\sourcing\automation\automation_cpr\03112008\hiro\hiro.mh t
locating boss; changed finish go fx8 578-0306-3 00 fx8-120/120s11-svj 240 board mounting female 0.6 0.6 3.00,4.00 smt 0.4 gold -55 to 85 1pcs. socket; straight; 2-piece connection; locating boss go fx8 578-0006-0 71 fx8-120p-sv(71) 120 board mounting male 0.6 0.6 3.00 smt 0.4 gold -55 to 85 1pcs. header; straight; locating boss; changed finish go fx8 578-0006-0 91 fx8-120p-sv(91) 120 board mounting male 0.6 0.6 3.00 smt 0.4 gold -55 to 85 12pcs. (1stick) header; straight; locating boss; specified packaging; changed finish go fx8 578-0006-0 92 fx8-120p-sv(92) 120 board mounting male 0.6 0.6 3.00 smt 0.4 gold -55 to 85 1reel (1000pcs.) header; straight; locating boss; specified packaging; changed finish go fx8 578-0046-4 71 fx8-120p-sv1(71) 120 board mounting male 0.6 0.6 4.00 smt 0.4 gold -55 to 85 1pcs. header; straight; locating boss; height:+1mm; changed finish go fx8 578-0046-4 91 fx8-120p-sv1(91) 120 board mounting male 0.6 0.6 4.00 smt 0.4 gold -55 to 85 12pcs. (1stick) header; straight; locating boss; height:+1mm; specified packaging; changed finish go fx8 578-0046-4 92 fx8-120p-sv1(92) 120 board mounting male 0.6 0.6 4.00 smt 0.4 gold -55 to 85 1reel (1000pcs.) header; straight; locating boss; height:+1mm; specified packaging; changed finish go fx8 578-0206-9 00 fx8-120s-sv 120 board mounting female 0.6 0.6 3.00,4.00 smt 0.4 gold -55 to 85 1pcs. socket; straight; locating boss go fx8 578-0206-9 21 fx8-120s-sv(21) 120 board mounting female 0.6 0.6 3.00,4.00 smt 0.4 gold -55 to 85 12pcs. (1magazine) socket; straight; locating boss; specified packaging go fx8 578-0206-9 22 fx8-120s-sv(22) 120 board mounting female 0.6 0.6 3.00,4.00 smt 0.4 gold -55 to 85 1reel (1000pcs.) socket; straight; locating boss; specified packaging go fx8 578-0147-1 71 fx8-140/140p11-sv1j(71) 280 board male 0.6 0.6 4.00 smt 0.4 gold -55 to 85 1pcs. header; straight; 2-piece connection; pa g e 3 of 9 product lis t 11-ma r -2008 mhtml:file://\\blrwnapp002\sourcing\automation\automation_cpr\03112008\hiro\hiro.mh t
mounting locating boss; height:+1mm; changed finish go fx8 578-0107-7 71 fx8-140/140p11-svj(71) 280 board mounting male 0.6 0.6 3.00 smt 0.4 gold -55 to 85 1pcs. header; straight; 2-piece connection; locating boss; changed finish go fx8 578-0007-2 71 fx8-140p-sv(71) 140 board mounting male 0.6 0.6 3.00 smt 0.4 gold -55 to 85 1pcs. header; straight; locating boss; changed finish go fx8 578-0007-2 91 fx8-140p-sv(91) 140 board mounting male 0.6 0.6 3.00 smt 0.4 gold -55 to 85 10pcs. (1stick) header; straight; locating boss; specified packaging; changed finish go fx8 578-0007-2 92 fx8-140p-sv(92) 140 board mounting male 0.6 0.6 3.00 smt 0.4 gold -55 to 85 1reel (1000pcs.) header; straight; locating boss; specified packaging; changed finish go fx8 578-0007-2 95 fx8-140p-sv(95) 140 board mounting male 0.6 0.6 3.00 smt 0.4 gold -55 to 85 1pcs. header; straight; locating boss; specified packaging; changed finish go fx8 578-0047-7 71 fx8-140p-sv1(71) 140 board mounting male 0.6 0.6 4.00 smt 0.4 gold -55 to 85 1pcs. header; straight; locating boss; height:+1mm; changed finish go fx8 578-0047-7 91 fx8-140p-sv1(91) 140 board mounting male 0.6 0.6 4.00 smt 0.4 gold -55 to 85 10pcs. (1stick) header; straight; locating boss; height:+1mm; specified packaging; changed finish go fx8 578-0047-7 92 fx8-140p-sv1(92) 140 board mounting male 0.6 0.6 4.00 smt 0.4 gold -55 to 85 1reel (1000pcs.) header; straight; locating boss; height:+1mm; specified packaging; changed finish go fx8 578-0047-7 93 fx8-140p-sv1(93) 140 board mounting male 0.6 0.6 4.00 smt 0.4 gold -55 to 85 1reel (1000pcs.) header; straight; locating boss; height:+1mm; suction tape for automatic pcb mounting; specified pa g e 4 of 9 product lis t 11-ma r -2008 mhtml:file://\\blrwnapp002\sourcing\automation\automation_cpr\03112008\hiro\hiro.mh t
packaging; changed finish go fx8 578-0047-7 95 fx8-140p-sv1(95) 140 board mounting male 0.6 0.6 4.00 smt 0.4 gold -55 to 85 1pcs. header; straight; locating boss; height:+1mm; specified packaging; changed finish go fx8 578-0207-1 00 fx8-140s-sv 140 board mounting female 0.6 0.6 3.00,4.00 smt 0.4 gold -55 to 85 1pcs. socket; straight; locating boss go fx8 578-0207-1 21 fx8-140s-sv(21) 140 board mounting female 0.6 0.6 3.00,4.00 smt 0.4 gold -55 to 85 10pcs. (1stick) socket; straight; locating boss; specified packaging go fx8 578-0207-1 22 fx8-140s-sv(22) 140 board mounting female 0.6 0.6 3.00,4.00 smt 0.4 gold -55 to 85 1reel (1000pcs.) socket; straight; locating boss; specified packaging go fx8 578-0207-1 23 fx8-140s-sv(23) 140 board mounting female 0.6 0.6 3.00,4.00 smt 0.4 gold -55 to 85 1reel (1000pcs.) socket; straight; locating boss; suction tape for automatic pcb mounting; specified packaging go fx8 578-0207-1 33 fx8-140s-sv(33) 140 board mounting female 0.6 0.6 3.00,4.00 smt 0.4 gold -55 to 85 1reel (1000pcs.) socket; straight; locating boss; suction tape for automatic pcb mounting; specified packaging; changed finish go fx8 578-0009-8 71 fx8-40p-sv(71) 40 board mounting male 0.6 0.6 3.00 smt 0.4 gold -55 to 85 1pcs. header; straight; locating boss; changed finish go fx8 578-0009-8 91 fx8-40p-sv(91) 40 board mounting male 0.6 0.6 3.00 smt 0.4 gold -55 to 85 28pcs. (1stick) header; straight; locating boss; specified packaging; changed finish go fx8 578-0009-8 92 fx8-40p-sv(92) 40 board mounting male 0.6 0.6 3.00 smt 0.4 gold -55 to 85 1reel (1000pcs.) header; straight; locating boss; specified packaging; changed finish go fx8 578-0209-7 21 fx8-40s-sv(21) 40 board female 0.6 0.6 3.00,4.00 smt 0.4 gold -55 to 85 28pcs. socket; straight; locating boss; pa g e 5 of 9 product lis t 11-ma r -2008 mhtml:file://\\blrwnapp002\sourcing\automation\automation_cpr\03112008\hiro\hiro.mh t
mounting (1stick) specified packaging go fx8 578-0209-7 22 fx8-40s-sv(22) 40 board mounting female 0.6 0.6 3.00,4.00 smt 0.4 gold -55 to 85 1reel (1000pcs.) socket; straight; locating boss; specified packaging go fx8 578-0141-5 71 fx8-60/60p11-sv1j(71) 120 board mounting male 0.6 0.6 4.00 smt 0.4 gold -55 to 85 1pcs. header; straight; 2-piece connection; locating boss; height:+1mm; changed finish go fx8 578-0101-0 71 fx8-60/60p11-svj(71) 120 board mounting male 0.6 0.6 3.00 smt 0.4 gold -55 to 85 1pcs. header; straight; 2-piece connection; locating boss; changed finish go fx8 578-0301-0 00 fx8-60/60s11-svj 120 board mounting female 0.6 0.6 3.00,4.00 smt 0.4 gold -55 to 85 1pcs. socket; straight; 2-piece connection; locating boss go fx8 578-0001-6 71 fx8-60p-sv(71) 60 board mounting male 0.6 0.6 3.00 smt 0.4 gold -55 to 85 1pcs. header; straight; locating boss; changed finish go fx8 578-0001-6 91 fx8-60p-sv(91) 60 board mounting male 0.6 0.6 3.00 smt 0.4 gold -55 to 85 21pcs. (1stick) header; straight; locating boss; specified packaging; changed finish go fx8 578-0001-6 92 fx8-60p-sv(92) 60 board mounting male 0.6 0.6 3.00 smt 0.4 gold -55 to 85 1reel (1000pcs.) header; straight; locating boss; specified packaging; changed finish go fx8 578-0041-0 71 fx8-60p-sv1(71) 60 board mounting male 0.6 0.6 4.00 smt 0.4 gold -55 to 85 1pcs. header; straight; locating boss; height:+1mm; changed finish go fx8 578-0041-0 91 fx8-60p-sv1(91) 60 board mounting male 0.6 0.6 4.00 smt 0.4 gold -55 to 85 21pcs. (1stick) header; straight; locating boss; height:+1mm; specified packaging; changed finish go fx8 578-0041-0 92 fx8-60p-sv1(92) 60 board mounting male 0.6 0.6 4.00 smt 0.4 gold -55 to 85 1reel (1000pcs.) header; straight; locating boss; height:+1mm; specified pa g e 6 of 9 product lis t 11-ma r -2008 mhtml:file://\\blrwnapp002\sourcing\automation\automation_cpr\03112008\hiro\hiro.mh t
packaging; changed finish go fx8 578-0201-5 00 fx8-60s-sv 60 board mounting female 0.6 0.6 3.00,4.00 smt 0.4 gold -55 to 85 1pcs. socket; straight; locating boss go fx8 578-0201-5 21 fx8-60s-sv(21) 60 board mounting female 0.6 0.6 3.00,4.00 smt 0.4 gold -55 to 85 21pcs. (1magazine) socket; straight; locating boss; specified packaging go fx8 578-0201-5 22 fx8-60s-sv(22) 60 board mounting female 0.6 0.6 3.00,4.00 smt 0.4 gold -55 to 85 1reel (1000pcs.) socket; straight; locating boss; specified packaging go fx8 578-0143-0 71 fx8-80/80p11-sv1j(71) 160 board mounting male 0.6 0.6 4.00 smt 0.4 gold -55 to 85 1pcs. header; straight; 2-piece connection; locating boss; height:+1mm; changed finish go fx8 578-0103-6 71 fx8-80/80p11-svj(71) 160 board mounting male 0.6 0.6 3.00 smt 0.4 gold -55 to 85 1pcs. header; straight; 2-piece connection; locating boss; changed finish go fx8 578-0003-1 71 fx8-80p-sv(71) 80 board mounting male 0.6 0.6 3.00 smt 0.4 gold -55 to 85 1pcs. header; straight; locating boss; changed finish go fx8 578-0003-1 91 fx8-80p-sv(91) 80 board mounting male 0.6 0.6 3.00 smt 0.4 gold -55 to 85 17pcs. (1stick) header; straight; locating boss; specified packaging; changed finish go fx8 578-0003-1 92 fx8-80p-sv(92) 80 board mounting male 0.6 0.6 3.00 smt 0.4 gold -55 to 85 1reel (1000pcs.) header; straight; locating boss; specified packaging; changed finish go fx8 578-0043-6 71 fx8-80p-sv1(71) 80 board mounting male 0.6 0.6 4.00 smt 0.4 gold -55 to 85 1pcs. header; straight; locating boss; height:+1mm; changed finish go fx8 578-0043-6 91 fx8-80p-sv1(91) 80 board mounting male 0.6 0.6 4.00 smt 0.4 gold -55 to 85 17pcs. (1stick) header; straight; locating boss; height:+1mm; specified packaging; changed finish header; straight; locating boss; pa g e 7 of 9 product lis t 11-ma r -2008 mhtml:file://\\blrwnapp002\sourcing\automation\automation_cpr\03112008\hiro\hiro.mh t
go fx8 578-0043-6 92 fx8-80p-sv1(92) 80 board mounting male 0.6 0.6 4.00 smt 0.4 gold -55 to 85 1reel (1000pcs.) height:+1mm; specified packaging; changed finish go fx8 578-0203-0 00 fx8-80s-sv 80 board mounting female 0.6 0.6 3.00,4.00 smt 0.4 gold -55 to 85 1pcs. socket; straight; locating boss go fx8 578-0203-0 21 fx8-80s-sv(21) 80 board mounting female 0.6 0.6 3.00,4.00 smt 0.4 gold -55 to 85 17pcs. (1magazine) socket; straight; locating boss; specified packaging go fx8 578-0203-0 22 fx8-80s-sv(22) 80 board mounting female 0.6 0.6 3.00,4.00 smt 0.4 gold -55 to 85 1reel (1000pcs.) socket; straight; locating boss; specified packaging go fx8 578-0144-3 71 fx8-90/90p11-sv1j(71) 180 board mounting male 0.6 0.6 4.00 smt 0.4 gold -55 to 85 1pcs. header; straight; 2-piece connection; locating boss; height:+1mm; changed finish go fx8 578-0104-9 71 fx8-90/90p11-svj(71) 180 board mounting male 0.6 0.6 3.00 smt 0.4 gold -55 to 85 1pcs. header; straight; 2-piece connection; locating boss; changed finish go fx8 578-0004-4 71 fx8-90p-sv(71) 90 board mounting male 0.6 0.6 3.00 smt 0.4 gold -55 to 85 1pcs. header; straight; locating boss; changed finish go fx8 578-0004-4 91 fx8-90p-sv(91) 90 board mounting male 0.6 0.6 3.00 smt 0.4 gold -55 to 85 15pcs. (1stick) header; straight; locating boss; specified packaging; changed finish go fx8 578-0004-4 92 fx8-90p-sv(92) 90 board mounting male 0.6 0.6 3.00 smt 0.4 gold -55 to 85 1reel (1000pcs.) header; straight; locating boss; specified packaging; changed finish go fx8 578-0044-9 71 fx8-90p-sv1(71) 90 board mounting male 0.6 0.6 4.00 smt 0.4 gold -55 to 85 1pcs. header; straight; locating boss; height:+1mm; changed finish go fx8 578-0044-9 91 fx8-90p-sv1(91) 90 board mounting male 0.6 0.6 4.00 smt 0.4 gold -55 to 85 15pcs. (1stick) header; straight; locating boss; height:+1mm; specified packaging; changed finish pa g e 8 of 9 product lis t 11-ma r -2008 mhtml:file://\\blrwnapp002\sourcing\automation\automation_cpr\03112008\hiro\hiro.mh t
go fx8 578-0044-9 92 fx8-90p-sv1(92) 90 board mounting male 0.6 0.6 4.00 smt 0.4 gold -55 to 85 1reel (1000pcs.) header; straight; locating boss; height:+1mm; specified packaging; changed finish go fx8 578-0204-3 00 fx8-90s-sv 90 board mounting female 0.6 0.6 3.00,4.00 smt 0.4 gold -55 to 85 1pcs. socket; straight; locating boss go fx8 578-0204-3 22 fx8-90s-sv(22) 90 board mounting female 0.6 0.6 3.00,4.00 smt 0.4 gold -55 to 85 1reel (1000pcs.) socket; straight; locating boss; specified packaging 1.all information, such as connector spec ifications, dimensions, etc, on the web site are reference only. connector information can be changed without notice. please request the latest specification and dwg from hrs be fore you design in our products. please confirm the rohs status using the rohs compliant part number search on this web site. 2.please check the availability of non-ro hs compliant products before ordering. non-rohs compliant products may be discontinued . *product specifications on this website ar e subject to change without notice. contact hirose for latest specifications, drawing s, or availabilities. *this p a g e is best viewed usin g internet ex p lorer 5.5 or hi g her. pa g e 9 of 9 product lis t 11-ma r -2008 mhtml:file://\\blrwnapp002\sourcing\automation\automation_cpr\03112008\hiro\hiro.mh t

▲Up To Search▲

Price & Availability of DF3D-8P-2H20

	To Download DF3D-8P-2H20 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .